Electrolux washing machine

Electrolux E94 error code: invalid module configuration

The control module is not configured correctly.

Engineer jobTypical repair: £60–£190.

Likely causes

Replacement module not programmed

How to fix E94

Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
Engineer to reprogram or replace the module.
Run a short test cycle. If E94 returns, the fault is still there and an engineer should look at it.

Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Full fault guide

Washing machine won't turn onDetailed causes, DIY steps and costs

Other Electrolux washing machine error codes

Electrolux washing machine repair near you

Frequently asked questions

What does Electrolux error code E94 mean?

The control module is not configured correctly. On a Electrolux washing machine, E94 is shown as "invalid module configuration".

How do I clear the E94 error on a Electrolux washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E94 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Electrolux E94?

£60–£190. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E94 mean the same on every Electrolux model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.