Electrolux washing machine

Electrolux E13 error code: water leak detected

Leak protection triggered.

DIY: moderateTypical repair: £60–£160 depending on the part.

Likely causes

Leaking hose, seal or pump

How to fix E13

Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
Turn off water and check for leaks.
Run a short test cycle. If E13 returns, the fault is still there and an engineer should look at it.

Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Full fault guide

Washing machine leakingDetailed causes, DIY steps and costs

Other Electrolux washing machine error codes

Electrolux washing machine repair near you

Frequently asked questions

What does Electrolux error code E13 mean?

Leak protection triggered. On a Electrolux washing machine, E13 is shown as "water leak detected".

How do I clear the E13 error on a Electrolux washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E13 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Electrolux E13?

£60–£160 depending on the part. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E13 mean the same on every Electrolux model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.