Appliance Repair HubFind · Fix · Decode

AEG washing machine

AEG E61 error code: heating fault

The water is not heating properly.

Engineer jobTypical repair: £80–£170.

Likely causes

  • Failed heating element
  • Faulty thermistor

How to fix E61

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Engineer diagnosis.
  3. Run a short test cycle. If E61 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E61 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other AEG washing machine error codes

AEG washing machine repair near you

AEG washing machine repair

Frequently asked questions

What does AEG error code E61 mean?

The water is not heating properly. On a AEG washing machine, E61 is shown as "heating fault".

How do I clear the E61 error on a AEG washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E61 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix AEG E61?

£80–£170. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E61 mean the same on every AEG model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.