Appliance Repair HubFind · Fix · Decode

AEG washing machine

AEG E11 error code: fill time exceeded

The drum took too long to fill.

DIY: easyTypical repair: £70–£140.

Likely causes

  • Low water pressure
  • Blocked inlet filter

How to fix E11

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Check supply and filter.
  3. Run a short test cycle. If E11 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E11 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other AEG washing machine error codes

AEG washing machine repair near you

AEG washing machine repair

Frequently asked questions

What does AEG error code E11 mean?

The drum took too long to fill. On a AEG washing machine, E11 is shown as "fill time exceeded".

How do I clear the E11 error on a AEG washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E11 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix AEG E11?

£70–£140. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E11 mean the same on every AEG model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.