Whirlpool washing machine

Whirlpool F05 error code: drain / pump fault

The machine cannot drain properly or the pump circuit is faulty.

DIY: easyTypical repair: £70–£150 for a pump replacement including parts; filter clearing is free.

Likely causes

Blocked filter
Failed drain pump
Pressure switch fault

How to fix F05

Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
Clean the pump filter and hose.
If it persists, replace the pump.
Run a short test cycle. If F05 returns, the fault is still there and an engineer should look at it.

Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Full fault guide

Washing machine not drainingDetailed causes, DIY steps and costs

Other Whirlpool washing machine error codes

Whirlpool washing machine repair near you

Frequently asked questions

What does Whirlpool error code F05 mean?

The machine cannot drain properly or the pump circuit is faulty. On a Whirlpool washing machine, F05 is shown as "drain / pump fault".

How do I clear the F05 error on a Whirlpool washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If F05 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Whirlpool F05?

£70–£150 for a pump replacement including parts; filter clearing is free. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does F05 mean the same on every Whirlpool model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.