Appliance Repair HubFind · Fix · Decode

LG washing machine

LG FE error code: overfill error

Too much water in the drum.

Engineer jobTypical repair: £70–£140.

Likely causes

  • Faulty inlet valve
  • Faulty level sensor

How to fix FE

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Unplug, drain, call an engineer.
  3. Run a short test cycle. If FE returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need FE fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other LG washing machine error codes

LG washing machine repair near you

LG washing machine repair

Frequently asked questions

What does LG error code FE mean?

Too much water in the drum. On a LG washing machine, FE is shown as "overfill error".

How do I clear the FE error on a LG washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If FE comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix LG FE?

£70–£140. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does FE mean the same on every LG model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.