Bosch washing machine

Bosch E17 error code: water inlet fault

The machine is not getting enough water within the time allowed.

DIY: easyTypical repair: £70–£140.

Likely causes

Tap turned off or low pressure
Blocked inlet filter at the back of the machine
Faulty inlet valve
Kinked inlet hose

How to fix E17

Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
Check the tap is fully open.
Unscrew the inlet hose and clean the small mesh filter.
Check the hose for kinks.
Run a short test cycle. If E17 returns, the fault is still there and an engineer should look at it.

Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Full fault guide

Washing machine not filling with waterDetailed causes, DIY steps and costs

Other Bosch washing machine error codes

Bosch washing machine repair near you

Frequently asked questions

What does Bosch error code E17 mean?

The machine is not getting enough water within the time allowed. On a Bosch washing machine, E17 is shown as "water inlet fault".

How do I clear the E17 error on a Bosch washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E17 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Bosch E17?

£70–£140. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E17 mean the same on every Bosch model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.